ucs512 dmx Flexible Digital LED Strip
These are the dmx strips that can be controlled with computers and other DMX/Digital SD Card Controllers. The advantage of dmx strips is that you can control each led (1.31" section) by itself so you can make video/chasing effects and other patterns. These color changing LED strips are flexible, bright, and easy to install! They are much brighter and longer-lasting than traditional rope light.
Each roll of flexible LED strip is 16‘ long (actually 16‘-5" or 5 meters with wire on each end). The LED type used are the 5050 type super bright 3 in 1 SMD LEDs. There are 150 & 300 per 16‘ roll. They run on 5V DC. The waterproof rating is IP65/IP67, which means that these flexible LED strips can get wet.
Details These dmx strips can change any color/pattern with the use of a controller or via DMX so you will need a SD Card Controller designed to control the ucs512 chip or use standard DMX and a DMX to ucs512 Converter.
Features and Benefits:
- 30 leds/m ucs512 IC addressable flex led strip,
- Control IC included, supporting numerous Color-change effects,
- Pcontrol by SD controller,Arduino,DMX512,Artnet
- Flexible PCB 5V low voltage input,
- PCB Color: black color only,
- cuttable every 1 LED,each IC control 1pcs RGB LED
- 5M per roll,Customer’s size available also
- 3M adhesive tape attached on back side of strip, but the waterproof version use Silicon Coating.
- We provided 5pcs plastic holder and 10pcs screw instead of 3M tape
- This not auto- addressable, you need to write the address by the DMX address writer.